DIY hybrid conversion

I have a '92 chevy with a busted drive shaft that i was thinking about converting to a hybrid. the splice and mate sounds like the perfect solution. would the motor also act as a generator to recharge the batteries? would it also provide regenerative breaking?

[hybridman2]

You're right about that not being easy, or cheap.

Why go to all that trouble for meager gains? Listen, go to Home Depot and buy a hundred dollars in parts like I show you in my book on using water to Save Gas . Build it and install it in a weekend. Start saving 20%,30%, 50% or more in gas from the first day.

Your '69 Firebird would love the cleaner fuel and the sludge getting cleaned out from the inside.

You want a mini Hybrid? Make it a Water Hybrid and you'll never go back.

Bob
Hybrid Water Car-Run Your Car On Water

You've got some good ideas. It will be a monumental task, however there is a way to make the process easier. It's a system for building hybrid fuel modules for your car and doesn't cost much compared to the gas you'll save. It also describes the best tools and resources to work with during your project.

If you're interested, visit my website: http://www.converttohybridnow.com

Are you sick of paying more than $3 a gallon for gasoline only to see the prices continue to rise gas? Are you sick of lining the pockets of the billionaires in the oil game that rake in obscene salaries while people like you and I suffer as we struggle to put enough gas in our cars to get to work each day?Brown's gas , hydrogen from electrolysis at least 20%better gas mileage. More Details please visit http://www.hyfusion.com

Are you sick of paying more than $3 a gallon for gasoline only to see the prices continue to rise gas? Are you sick of lining the pockets of the billionaires in the oil game that rake in obscene salaries while people like you and I suffer as we struggle to put enough gas in our cars to get to work each day?Brown's gas , hydrogen from electrolysis at least 20%better gas mileage. More Details please visit http://www.hyfusion.com

Hydrogen generator can be easily done with your hands, here's a little instruction:
Hydrogen generator - with their hands

So, this page has pretty much been taken over by the HHO scamsters. Too bad.

Few large manufacturers from Machining Partners are building these now commercially.

You may find plans and blueprints for 11 different models on
http://www.BestWaterHybrids.com/?gasfree

GNOCCA - escort accompagnatrici ragazze trans e coppie <a href=http://GNOCCA.ORG>GNOCCA a ITALIA</a>.