Ford Fusion hybrid PHEV kit
I recently installed a PHEV 4kw battery kit on my Fusion hybrid. This kit charges
the stock hybrid battery and supplies additional power to the hybrid electric motor when
driving in EV mode or assist mode. It connects to the hybrid battery in parallel and does not
replace any of the hybrid components or factory settings.
So far I am seeing an increase of about 50% MPG on average and have been able to drive up to 2 miles in pure EV mode. If the conditions were right I should be able to drive further. They still need to make an adjustment to the kit to prevent the kit from shutting itself off randomly. I understand I am the first person to install this type of PHEV kit on a Fusion. If anyone else is interested, I can provide
Thanks for posting the
Thanks for posting the phev fusion info.
I'm in the market for a hybrid fusion with the contemplation installing the enginer phev kit. more info on your experience so far would be much appreciated.
Sorry for the late response
Sorry for the late response I haven't been checking this web site much lately.
The kit has had some issues with shutting down randomly but it appears that
this may be mostly resolved. They replaced the battery, charger and upgraded the BMS
and adjusted the current. It still shuts down occasionally but will usually come back on
after flipping the switch off and on again. The mileage varies but usually I can get between
30 to 50 percent improvement per trip. The one down side is that you will want to remove
the spare tire from the well as it is very difficult to get the spare tire out with the kit installed.
But this is the same with all hybrids not just the Fusion. The service with Engineer was great.
They were very responsive and worked to resolve the problems. Since this was the first Fusion
install things didn't go as smooth but now that it's documented it should go better for the next one.
Let me know if you have any more questions.