+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Dec 2006
    Posts
    0

    Confusion about which battery cranks engine

    I was under the impression that the 330v (or whatever it is) batteries are used to crank the engine. Yesterday afternoon I left the parking lights turned on. This morning the engine wouldn't crank, the car was "dead." I had to jump the 12v battery to start the engine. What am I not understanding? This is on a 2007 Mercury Mariner.

  2. Remove Advertisements
    HybridCars.com
    Advertisements
     

  3. #2
    Junior Member
    Join Date
    Oct 2006
    Posts
    0
    The 330V battery cranks the engine over, however, the 12v battery must have a charge so the PCM and TBCM can send a signal from the 12V battery system to the TBCM for this to happen. In other words, both batteries must have enough charge.

    Once you restored the PCM (brain power) with the 12V battery and the traction battery control module (brain power), power could be sent to MG1 to start the engine. The PCM can then send fuel and spark to the combustion chamber to start the engine.

    GaryG

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts